| 2025-1 |
M. A. Sarıkaya, A. Candaş, İ. Ege, K. M. Wilcken |
Geochronology and ice-flow modelling of the Late Quaternary glaciers on Mt. Soğanlı, Türkiye |
http://doi.org/10.1002/jqs.3660 |
|
The article co-authored by Dr. Adem Candaş, investigates the remnants of Late Quaternary glaciation on Mount Soğanlı, located in the interior regions of Türkiye. Using cosmogenic 36Cl surface exposure dating and numerical ice-flow modelling, the study provides detailed insights into glacier retreat phases and past climatic conditions in the region. |
| 2025-1 |
Çolak, A.B., Bacak, A., Karakoyun, Y. Koca Aliihsan, et al. |
Machine learning application with Bayesian regularization for predicting pressure drop in R134a's annular evaporation and condensation |
https://doi.org/10.1007/s40430-025-05527-8 |
|
SCI-Q2 |
| 2025-1 |
Çalışkan Cİ, Şahin M, Koca Aliihsan, Tarakçı G, Okbaz A, Dalkılıç AS. |
Mechanical performance and ANN-based prediction of Co-Cr dental alloys with gyroid cellular structures produced by LPBF technology |
10.1177/09544062241307458 |
|
SCI-Q2 |
| 2025-1 |
Koca, Aliihsan, Mustafaoglu, M., Karakoyun, Y. et al. |
The effect of the important variables for the design novel milli-channel cooling system on the evaporator performance by the Taguchi method |
https://doi.org/10.1007/s10973-024-13894-y |
|
SCI-Q1 |
| 2025-1 |
Çalışkan, C.İ., Khan, H.M., Koca, Aliihsan. et al. |
Mechanical strength investigation of gyroid design parameters in titanium fixed partial denture frameworks manufactured by additive manufacturing |
https://doi.org/10.1007/s00170-024-14938-1 |
|
SCI-Q1 |
| 2025-1 |
Emrullah Cebe , Özgur Kalbaran, Alaeddin Burak İrez |
A numerical investigation of ground impact for hierarchically designed hybrid composite structures in electric vehicle battery cases |
https://doi.org/10.1016/j.jpowsour.2025.236594 |
|
Journal of Power Sources |
| 2025-1 |
Muhammed Atıf Yilmaz, Kemal Hasırcı, Berk Gündüz, Alaeddin Burak Irez |
Advanced composite wing design for next-generation military UAVs: A progressive numerical optimization framework |
https://doi.org/10.1016/j.dt.2025.02.020 |
|
Defence Technology Journal |
| 2025-1 |
Merve Bilgen Bağci, Alaeddin Burak İrez |
Pellet Extrusion Additive Manufacturing of Carbon Nanotube Reinforced PEEK-Based Composites for Biomedical Applications |
https://doi.org/10.1201/9781003521792 |
|
Book Chapter published in Handbook of 3D Printing in Biomedical Applications – CRC Press |
| 2025-1 |
Fırat Mehmet Günkan, Bülent Sümer, İlker Murat Koç |
Reducing drive torque in needle valves through tip material selection with a tribological approach |
https://doi.org/10.1016/j.triboint.2025.110671 |
|
This study evaluates the performance of needle valve tips made from four distinct materials (steel, aluminum, POM-polyacetal, and Nylon-66) paired with a steel valve-body with experimental validation |
| 2025-1 |
Ömer Ekim Genel, Hilal Koç, Ekrem Tüfekci |
In-Plane Static Analysis of Curved Nanobeams Using Exact-Solution-Based Finite Element Formulation |
https://doi.org/10.32604/cmc.2025.060111 |
|
This study presents a new two-noded curved finite element for analyzing the in-plane static behaviors of curved nanobeams. Opposite to traditional curved finite elements developed by using approximate interpolation functions, the proposed curved finite element is developed by using exact analytical solutions. |
| 2025-1 |
Mithat Can Özin, Bilsay Sümer, İlker Murat Koç |
Multiobjective Pareto Optimality of a Cross-Beam Six Axis Force/Moment Sensor With Genetic Algorithm and Approximate Analytical Model |
10.1109/JSEN.2025.3544965 |
|
Six-axis force/moment sensor technology currently lacks an extensive, fast, and accurate size optimization methodology in common sensor diameters that can check sensor body strain output, size, safety, and vibration response for designing custom sensors. This study utilizes a new analytical model for optimization of a cross-beam sensor that has higher accuracy in an extensive sensor dimension range and respects design safety and vibration frequency. The new optimization problem formulation aims to maximize strain outputs and minimize sensor diameter. |
| 2025-1 |
Caglar Sahin, Seyhan Uygur Onbasioglu |
Experimental and numerical investigation of suction muffler outlet pipe geometry effect on volumetric efficiency and COP |
https://doi.org/10.1016/j.ijrefrig.2025.02.001. |
International Journal of Refrigeration |
This study investigates how the design of the muffler outlet pipe and the compressor speed affect the volumetric efficiency and COP using both experimental and numerical methods. Three distinct muffler outlet pipe designs, characterized by varying lengths and diameters, are tested across four different compressor speeds using R600a refrigerant. A numerical model is developed using the GT-SUITE™ platform and subsequently validated against the experimental results. |
| 2025-1 |
Volkan Bekir Yangın, Yaprak Yalçın, Özgen Akalın |
A tunable explicit nonlinear MPC for a vehicle considering improved path tracking performance and computational efficiency |
http://doi.org/10.1007/s12206-025-0446-4 |
|
In this paper, a novel tunable explicit nonlinear MPC (E-NMPC), which provides satisfactory path-following performance and computational efficiency is proposed for a vehicle in the NATO double lane change maneuver. The proposed controller is based on an artificial neural network (ANN), which is a useful tool to model complex systems. The control law is generated offline to reduce the computational burden. |
| 2025-1 |
Başar Zaman, Volkan Bekir Yangın, Özgen Akalın |
ANN-Based PID Tuning Mechanism for a Vehicle Control System Considering Improved Path Following |
|
Conference Paper (4. Uluslararası Lisansüstü Araştırmalar Sempozyumu (IGRS'25)) |
The objective of this study is to compare vehicle path tracking performance by using PID control strategy based on ANN tuning with the path tracking accuracy of the PID control strategy where the controller gains are tuned based on Ziegler-Nichols method. PID controller creates differential brake forces to follow the reference trajectory as a back-up for the steering system in case of failure. The proposed methodology is validated through a Simulink-ADAMS co-simulation, where a test vehicle performs a NATO Double Lane Change (DLC) maneuver using differential braking for steering redundancy. |
| 2025-1 |
Mete Kayıhan, Mustafa Bakkal |
Comparison of analytical and finite element solutions for monitoring the self-generated temperature in the fatigue test of novel continuous glass fiber-reinforced Elium thermoplastic composites |
10.1002/pc.29881 |
|
|
| 2025-1 |
Elifnur Kösemen, Mustafa Bakkal, Ali Taner Kuzu |
Enhancing Mechanical Performance of FDM-Printed ABS Parts Through Annealing Optimization |
10.1002/pen.70008 |
|
|
| 2025-1 |
Görkem Tok, Ali Taner Kuzu, Mustafa Bakkal |
Investigation of residual stresses induced by turning of hot forged and heat treated AA7075 |
10.1007/s00170-024-14724-z |
|
|
| 2025-1 |
Muhammet Burhan Navdar , Erkan Çelebi, Tahsin Engin, Hüseyin Dal, Fırat Can Yılmaz |
Experimental and numerical study on vibration mitigation of slender structures with TLCD under second-order effects |
10.1016/j.jobe.2024.111675 |
|
|
| 2025-1 |
Ahmet Aydın, Tahsin Engin, Ahmed Kovacevic |
Design optimisation of a screw compressor with a focus on rotor depth: A computational fluid dynamics approach |
10.1016/j.ijrefrig.2024.12.001 |
|
|
| 2025-1 |
Yunus Emre Torun, Haluk Erol |
A Trade-Off Study Among Ride Comfort and Safety Against Derailment in the Rail Vehicle Suspension Design |
10.1007/s42417-025-01925-3 |
|
|
| 2025-1 |
Sinem Ozturk, Haluk Erol |
Acoustic multi-objective optimization of porous media properties of a diesel particulate filter |
10.59400/sv1805 |
|
|
| 2025-1 |
Bugra Eyidogan, Mesut Kirca |
Mechanical enhancement of hydroxyapatite via carbon and boron nitride nanotubes: a molecular dynamics study |
10.1007/s00894-025-06317-8 |
|
|
| 2025-1 |
Osman Furkan Yilmaz, Mesut Kirca |
Mechanical tuning of three-dimensional graphene network materials through geometric hybridization |
10.1016/j.commatsci.2024.113544 |
|
|
| 2025-1 |
H. Pahlavani, I. Bedii Ozdemir |
Effect of red blood cell concentration on the blood flow in patient-specific aneurysms |
10.1007/s42600-024-00381-4 |
|
|
| 2025-1 |
Zelal Yavuz, Remzi Ecmel Ece, Yahya Oz, Fahrettin Ozturk |
Investigation of sizing materials for carbon fiber reinforced thermoplastic composites |
|
|
|
| 2025-1 |
Suleyman Kilic, Fahrettin Ozturk, Mehmet Fatih Demirdogen |
A comprehensive literature review on friction stir welding: process parameters, joint integrity, and mechanical properties |
|
|
|
| 2025-1 |
Ramazan Çakır, Javidan Mammadli, Ahmet Faruk Şeker, Taha Eren Koca, Bayram Şahin |
A COMPREHENSIVE REVIEW ON BATTERY THERMAL MANAGEMENT AND MODELING |
10.1615/HeatTransRes.2025053111 |
|
|
| 2025-1 |
Ali Celik , Eyüphan Manay , Bayram Şahin |
Comparison of the energy and economic performance of a LEED certified educational building located in a cold climate region with the national standard |
10.17341/gazimmfd.1383681 |
|
|
| 2025-1 |
Faraz Afshari, Emre Mandev, Mehmet Akif Ceviz, Burak Muratçobanoğlu, Bayram Şahin, Ali Çelik, Eda Feyza Akyürek, Heydar Dehghanpour |
Exploring solar modified glazed balconies as energy sources for mini-split heat pumps to enhance thermal performance |
10.1016/j.renene.2025.122992 |
|
|
| 2025-1 |
A.S.M. Rokonuzzaman, Kasim Erdem, Bayram Şahin, Mehmed Rafet Özdemir |
Experimental study of a single-phase immersion cooling system with natural and forced convection |
10.1016/j.ijthermalsci.2025.109868 |
|
|
| 2025-1 |
U. Eroğlu · G. Ruta · E. Tüfekci · A. Paolone |
Improving the evaluation of static bifurcations in locally damaged parabolic arches |
10.1007/s11012-024-01932-w |
|
|
| 2025-1 |
Mertol Tüfekci, Onur Koçak, Yaren Özkan, İnci Pir, Ekrem Tüfekci |
Numerical Evaluation of Design Strategies for a Composite Wind Turbine Blade: Using Metallic Foams and Optimising Topology |
10.1002/ese3.70030 |
|
|
| 2025-1 |
İnci Pir, Ekrem Tüfekçi |
EVALUATION OF TEMPERATURE-DEPENDENT MECHANICAL PROPERTIES OF HNT AND RUBBER REINFORCED EPOXY COMPOSITES |
10.1115/SSDM2025-152468 |
|
|
| 2025-1 |
Arash Armanfar, Serhat Cam, Ersan Ustundag, Erkan Gunpinar |
Mechanical property optimization of parts manufactured via parametrized helical printing |
10.1007/s12008-025-02222-9 |
|
|
| 2025-1 |
Tunca Zeki Berkkurt, Merve Acer Kalafat, Atakan Altınkaynak |
Investigation of process parameters’ effects on strand morphology of FDM products |
10.1007/s40964-024-00682-1 |
|
|
| 2025-1 |
Metin Gürgöze and Atakan Altınkaynak https://orcid.org/0000-0003-3971-3641 |
Use of complex notation for solving vibrations equations |
10.1177/03064190241233685 |
|
|
| 2025-1 |
Eyyup Sincar, Zeki Y. Bayraktaroglu, Eray A. Baran, Evren Emre |
Performance Enhancement of a Stewart Platform Using Joint-Task Space Hybrid Control |
10.1109/ICHORA65333.2025.11016996 |
|
|
| 2025-1 |
Muhammet Umut Danis, Zeki Yagiz Bayraktaroglu |
Extended State Observer-Based Motion Control of Robot Manipulators in Presence of Uncertainties and Disturbances |
10.1049/cth2.70043 |
|
|
| 2025-1 |
Eyyup Sincar, Zeki Y. Bayraktaroglu |
Enhanced performance of a parallel manipulator with hybrid joint-space and task-space control approaches |
10.1017/S0263574725000074 |
|
|
| 2025-1 |
Ege Mert Ertorun, Mucahit Yayla, Deniz Isik & Sertac Cadirci |
One-way fluid–structure interaction modeling and multi-objective optimization of horizontal-axis wind turbine blades equipped with winglets |
10.1080/15435075.2024.2430432 |
|
|
| 2025-1 |
Alperen Yildizeli, Sertac Cadirci |
Calibration of the k-ω shear stress transport turbulence model for transitional boundary layer flows over flat plate and turbulent backward facing step flows |
10.1063/5.0246991 |
|
|
| 2025-1 |
Alperen Yildizeli, Mert Turhan Alver, Akif Celik, Mustafa Yurduseven, Sertac Cadirci |
Effect of the design modifications on the hemocompatibility and hydrodynamic performance of FDA-approved blood pump at various operating conditions |
10.1007/s42600-025-00403-9 |
|
|
| 2025-1 |
Uğurcan Eroğlu, Giuseppe Ruta |
A perturbation approach to two-phases, non-local, fully deformable beams |
10.1016/j.ijnonlinmec.2025.105136 |
|
|
| 2025-1 |
Erkan Gunpinar, A. Alper Tasmektepligil, Márton Vaitkus, Péter Salvi |
Optimization of cross-derivatives for ribbon-based multi-sided surfaces |
10.1016/j.gmod.2025.101275 |
|
|
| 2025-1 |
Emre Günaydın, Erkan Gunpinar |
Enhanced support structures in conformal additive manufacturing for improved geometric accuracy |
10.1016/j.jmapro.2025.04.005 |
|
|
| 2025-1 |
Abdülhamit Adsoy, Serpil Kurt, Ahmet Topuz |
Influence of fly ash and waste tire rubber particles on mechanical and tribological properties of composite brake linings |
10.1002/pc.29328 |
|
|
| 2025-1 |
O.A. Kutlar, M. Üngör, Ö. Cihan |
Design and experimental testing of a novel skip-cycle mechanism for Wankel engine |
10.1016/j.enconman.2024.119410 |
|
|
| 2025-1 |
Hüseyin Emre Doğan, Abdurrahman Demirci, Osman Akın Kutlar |
INVESTIGATION OF THE EFFECT OF COMPRESSION RATIO AND DIFFERENT FUELS ON CO2 EMISSIONS |
10.1615/InterJEnerCleanEnv.2024051076 |
|
|
| 2025-1 |
Farnaz Nojavan, Ersin Sayar |
Numerical study of implemented eco-friendly nanofluid in the pinfin-equipped heatsinks with novel C-shaped and V-shaped patterns |
10.1016/j.tsep.2024.103134 |
|
|
| 2025-1 |
Merve Üngör, Osman Taha Sen, Akif Yavuz, Cemal Baykara |
Feasibility Assessment of Novel Multi-Mode Camshaft Design Through Modal Analysis |
10.3390/machines13050407 |
|
|
| 2025-1 |
Akif Yavuz, Osman Taha Sen |
Development and performance assessment of different squeal index metrics based on experimental data |
10.1177/09544070241242827 |
|
|
| 2025-1 |
Onur Haydari , Emrecan Söylemez |
Fatigue crack growth characterization of the recycled carbon black reinforced natural rubber mixes |
10.17341/gazimmfd.1408888 |
|
|
| 2025-1 |
Hamed Rahmati Aydenlou, Abdussamet Subasi |
Designing a fuzzy-based PID controller for separation control in the backward-facing step flow |
10.1016/j.icheatmasstransfer.2025.109144 |
|
|
| 2025-1 |
Kasim Erdem, Abdussamet Subasi |
A novel approach for predicting multiple key properties of water-based nanofluids using artificial neural networks |
10.1016/j.molliq.2025.127590 |
|
|